Torit Cyclonic Dust Collectors

Cyclone dust collectors are mechanical separators that use the principle of centrifugal force to remove particulate from the airstream.

Typically used for collecting coarse or large dusts produced in high dust loading applications, such as woodworking or machining, cyclone collectors are also used for product recovery of fine dusts, like powdered paint. 

The Cyclone system has only one moving part, the inner fan wheel which requires very little maintenance. The large capacity collection drum works immediately to reduce facility and equipment maintenance.

	An economical solution to a wide range of dust collection problems.
	Excellent for high dust load, high temperature, and product recovery applications.
	Can be used alone, with filter bag assembly, or as a pre-cleaner.
	Applications from 300 to 13,000 CFM.
	Heavy-duty construction for long life and low maintenance.
	Meets seismic zone 4 and 100 mph wind load ratings.
	Removable cone section for easy replacement.

Functional Efficiency Curves

Fractional efficiency is the ratio of particles collected to particles entering the cyclone. This chart shows the efficiency of a collector with and without the optional filter bag assembly under clean, partial loading, and full-loading conditions Actual efficiency may vary depending on the application. Dust concentration, airflow, particle shape, and density affect filtration efficiency.

Base Options

Torit Cyclone Collectors

  Click here for PDF brochure of Torit Cyclone Dust Collectors

Don't see what you want? Call us!

With over 20 years experience in dust collection
and air quality improvement , we'll build what you need!

1 - 877 - 844 - 3293
Call toll free in the USA

Click here to e-mail your inquiry.
We'll respond to your request quickly!