The "Mini-Mist" Collection System

Mini-Mist's small footprint makes it easy to mount on or over a single machine.

Mini-Mist is perfect for machines that are fully enclosed or that have low CFM requirements. Mini-Mist’s design keeps installation costs to a minimum and provides high efficiency filtration.

A reduction in airborne contaminants helps cut operating costs and protects the operator’s breathing zone.

Airflow ranges from 400-600 CFM. Units weigh from only 160 lbs. and operate at only 72 dBA!

How the Mini-Mist operates

A direct-drive fan pulls dirty air through the inlet on the bottom of the unit.

Mini-Mist units incorporate three filter stages to trap contaminants. First, a cleanable 4” thick impinger acts as a prefilter for mist. Second, a 1” thick aluminum mesh filter works to trap large particles.  And third, a 23 square foot glass fiber filter captures 99.9%the remaining fine contaminants and mist. 

Clean, filtered air exhausts out the blower back into the work environment.

The Mini-Mist motor is TEFC, 1/2 HP; voltage is 115/1/60 Hz.

A standard minihelic gauge indicates when filters need to be changed, and the cabinet design makes filter changes easy. Just unscrew the four knobs, remove the door, and slide out the filters.

Mini-Mist units are easy to operate and maintain. An ON/OFF switch turns the unit on and off - no extra motor control is required.

An optional inlet hose kit is available for overhead mounting and an optional silencer reduces blower exhaust noise.

Let's Discuss it!
1 - 877 - 844 - 3293
Call toll free in the USA

Click here to e-mail your inquiry.
We'll respond to your request quickly!